Hardware Installation
The iPlayer 3 comes packaged with the printed iPlayer 3 Installation Instructions.The Installation Instructions document has illustrated steps covering physical setup, hardware mounting, and connecting your lighting system. Follow the steps in the iPlayer 3 Installation Instructions now.
Understanding Light Addresses
ETip
To follow this Quick Start guide, do not change the default light addresses assigned to your fixtures.
iPlayer 3 streams data to the RGB lighting fixtures in your installation via the DMX512 protocol.
Each fixture in your installation has a light address. For light show designs with the same color displayed simultaneously on all fixtures, changes to the factory default light addresses are not necessary. However, if the light show design specifies different colors on different fixtures, then you must
Most
Chromasic® fixtures are addressed to light address 1 through light address n, the number of nodes per fixture. If a starting address different from 1 is required, use the iPlayer 3 SAS tool to enter a base address for the first node, and the remaining nodes will address automatically in sequential order.
Light Show Playback
.
•To play additional shows, press 
– 
.
•To adjust the overall brightness level of your show, press 
and 
.
•Press 
to pause playback and turn all fixtures OFF.
DNote
You can change the preconfigured show assigned to each preset button (see 
for details).You can also download and assign custom ColorPlay 3 shows to the preset buttons (see ColorPlay 3 User Guide).
'DA
36/.0%&
4GNV
=#
Adjust brightness level
Change mode Navigate menus
Pause / resume show
Cancel menu action
Select a show trigger for playback
