5.When the correct channel is located, select [Store], then press OK.
6.Press 
to exit.
Notes
∙If the reception is poor, reposition your antenna and repeat the procedure.
∙If you receive the channel with
In [Symbol rate mode], select [Automatic] unless your cable provider supplies you with a specific symbol rate value.
Install satellite channels
(For certain models only)
If your satellite is connected to the SAT
connector, you can receive satellite channels. Note: If you are prompted to enter a code,
enter '8888'.
1.While watching TV, press 
.
2.Select [Setup] > [Search for satellite] >
[Reinstall channels].
3.Follow the
4.Once complete, select [Finish], and then press OK.
Fine tune analog channels
If the reception of an analog TV channel is poor, try fine tuning the TV channel.
1.Press 
.
2.Select [Setup] > [Channel settings] >
[Channel installation] > [Analogue: Manual installation] > [Fine tune], and then press OK.
3.Press 
or 
to fine tune the channel.
4.When the correct channel frequency is
selected, select [Done], and then press OK.
5.Select [Store current channel] to store
the fine tuned channel under the current channel, or select [Store as new channel] to
store under a new channel number.
EN 34
Change language settings
Audio, subtitle, teletext languages
Digital TV channels may stream several audio, subtitle and teletext languages with a broadcast. Set preferred languages when multiple languages are available.
1.Press 
.
2.Select [Setup] > [Channel settings] or
[Satellite settings] > [Language].
3.Select one of the following settings, then press OK:
∙ [Primary audio] / [Secondary audio]: Selects the available audio language for
digital channels.
∙ [Primary subtitles] / [Secondary subtitles]: Selects the available subtitle
language for digital channels.
∙ [Primary Text] / [Secondary Text]: Selects the available teletext for digital
channels.
∙ [Hearing impaired]: Enables or disables
hearing impaired subtitles.
∙ [Visually impaired] (UK only): Selects
the device for audio output.
∙ [Volume - Visually impaired] (UK only): Adjusts the volume of the visually impaired audio.
∙[Preferred audio format]: Select [Standard] to receive standard audio format (MPEG). Select [Advanced] to receive advanced audio formats (AAC,
∙[Mono/Stereo]: Select [Mono] or [Stereo] if stereo broadcasting is available.
4. Press 
to exit.
Tip: Set a secondary language in the same menu. You receive this language if the primary language is unavailable.
Menu language
1.While watching TV, press 
.
2.Select [Setup] > [TV settings] >
[Preferences] > [Menu language].
3.Select a menu language from the list, then press OK.
