Shift

To type an uppercase character, press and hold the ( (Shift) key (2) and type the uppercase character you need. If you only need 1 uppercase character in your text, press the ( key just before typing the character you need.

If you need to type several uppercase characters consecutively, you can hold the ( key while typing or press the ( key for 2 seconds to switch the keyboard in uppercase mode.

Press the ( key once to switch out of the uppercase mode again. If you do not press any character on the keyboard, the uppercase mode switches off automatically after 20 seconds. Also, if you press any other modifier key on the keyboard, like Fn (3) or the àö! (4) key, you switch out of the uppercase mode.

Alternative characters

To type an alternative character (the coloured characters on the keyboard) press and hold the Fn key (3) and type the alternative character you need. You can switch to or back out of the alternative character mode as you do for the uppercase mode.

Special characters - àö!

Some characters have no key on the remote control keyboard. To enter special characters, you can open the onscreen keyboard.

To open the onscreen keyboard, press àö! (4). In the onscreen keyboard, you can navigate to the character you need. Switch the keyboard lay-out with the colour keys. Press OK to enter a character. The onscreen keyboard disappears when you press a character on the remote control keyboard. Alternatively, you can enter special characters with the remote control SMS/text keypad on the front of the remote control.

Email and Internet

You can use the Fn key to enter the characters for email and Internet use, like @, # or www. and .com.

Keyboard overview

1 - Fn key

Hold the Fn key to type an alternative, coloured character.

2 - ( Shift

Hold the Shift key to type uppercase characters.

3 - y Spacebar key

4 - Arrow keys

5 - Enter

Press Enter to confirm the text you entered.

6 - Backspace

Deletes the character in front of the text cursor.

7 - àö! Special character key

Press àö! to open the onscreen keyboard to select a special character.

8 -AZERTY character key

Character if the keyboard lay-out is set to AZERTY.

Qwerty or Azerty

The standard layout of the remote control keyboard is

QWERTY.

You can also set the keyboard layout to AZERTY.

To change the keyboard layout, press hand select S Setup and press OK to open the Setup menu.

Select TV settings > General settings > Remote control keyboard.

Select QWERTY or AZERTY.

The AZERTY characters are indicated at the top right of the relevant keys.

IR Sensor

The remote control of the TV uses RF (radio frequency) to send its commands to the TV. With RF, you do not need to point the remote control at the TV.

However, the TV can also receive commands from a remote control that uses IR (infrared) to send commands. If you use such a remote control, always make sure you point the remote control at the infrared sensor on the front of the TV.

20

TV / Remote control