In Help, press L List and look up Universal access for more information.

Menu language

To change the language of the TV menus and messages . . .

1 - Press h, select S Setup and press OK.

2 - Select TV settings > General settings > Menu language and press OK.

3 - Select the language you want and press OK.

4 - Press b, repeatedly if necessary, to close the menu.

3.7

Timers and clock

Sleeptimer

With the sleep timer, you can set the TV to switch to standby automatically after a specified time.

To set the sleep timer, press h, select S Setup and press OK.

Select TV settings > General settings > Sleep timer. With the slider bar you can set the time up to 180 minutes in increments of 5 minutes. If set to 0 minutes, the sleep timer is switched off.

You can always switch off your TV earlier or reset the time during the countdown.

Clock

To know what time it is, press GUIDE to find the time in the TV guide.

In some countries, digital broadcasts do not send UTC - Coordinated Universal Time information. The daylight saving change might be ignored and the TV might show an incorrect time.

To correct the TV clock, press h, select S Setup and press OK.

Select TV settings > General settings > Clock and select Country dependent.

Select Daylight saving and select the appropriate setting.

To set the time and date manually, select Manual. Then select Time or Date.

When you record programmes with Smart TV, Recording, we recommend not to change the time and date manually.

Switch off timer

If you do not press a key on the remote control during a 4 hour period, or if the TV receives no input signal and receives no remote control commands for 10 minutes, the TV switches off automatically to save energy.

If you use the TV as a monitor or use a digital receiver to watch TV (a Set-top box - STB) and you do not use the remote control of the TV, you should deactivate the automatic switch off.

To deactivate, press h, select S Setup and press OK. Select TV settings > General settings > Switch off timer and set the slider bar to 0.

In Help, press L List and look up Saving energy for more information on environmentally friendly TV settings.

3.8

Picture settings

Picture settings

In the Picture menu, you can adjust all picture settings individually.

To open the Picture settings, press h, select SSetup and press OK.

Select TV settings > Picture.

• Picture style

In Help, press L List and look up Picture style for adjusting the picture style settings.

• (3D) Backlight

Sets the contrast level of the backlight.

• Colour

Sets the level of colour saturation.

• Sharpness

Sets the level of sharpness of fine detail.

• Noise reduction

Filters out and reduces the image noise in the picture.

• MPEG artefact reduction

Smoothens the digital transitions in the picture.

• Pixel Precise HD

Controls the advanced settings of the Perfect Pixel HD Engine.

—Perfect Natural Motion removes motion judder and reproduces smooth movement, especially in movies.

—Clear LCD gives a superior motion sharpness, better black level, high contrast with a flicker-free, quiet image and a larger viewing angle.

—Super resolution enables superior sharpness, especially on lines and contours in the picture.

—Advanced sharpness enables superior sharpness, especially on details in the picture.

—​Perfect contrast sets the level at which the TV automatically enhances the details in the dark, middle and light areas of the picture.

TV / Picture settings

31