8

Devices with Component Video Output Connectors (YPbPr)

CVI-1 can handle 480i, 480p,576i, 576p, 720p and 1080i signals.
&Connect the RF Antenna cable 1to the RF INsocket of your recorder.
éConnect another RF cable 2from the output OUT of your recorder to the TV’s input ANTENNA
x 75 Ωjack.
“Connect the three separate component video cables 3to the device having component video
outputs (YPbPr),such as DVD-players, laser-disc players,videogame players,satellite receivers, or other
equipment and to the Y,Pb and Pr jacks of CVI-1 on the TV.
‘Connect the audio cable 4to the device’sAUDIO L and Rjacks and to the Land Raudio jacks of
CVI-1.
Note: the labels for the component video sockets may differ depending on the DVD player or the device
connected.Although the abbreviations may vary the letters B and R stand for blue and red component signals,
respectively,and Y indicates the luminance signal. Refer to the DVD player’s or device’s instructions for use for
definitions and connection details.
(Press the AV key on the remote control repeatedly until CVI-1 is selected.
3
4
CVI-1
CVI-1
2
CABLE
IN
OUT
1
2444.1 en 09-12-2005 11:50 Pagina 8