Philips 40PFL4758/V7 Features Menu, Installation Menu, Select Features, Features in VGA Mode

4.6 Features Menu

1Press

2Select [Setup]then pressOK

>Select [Features]

3Select one of the following settings then

Press to move, and press to adjust.

OSD Duration

Picture

Hotel Mode Control

Sound

Back Light

Features Sleep Time

Factory Settings

Installation

HDMI CEC

Blueback

•[OSD Duration] :This function is used to OSD timeout in step of 15,30,45,60 secs.

•[Hotel Mode Control] :Hotel mode control selection.

Notes:

The default password is 0000, and the master password is 8202.

•[Back Light] :Adjust the back light brightness.

•[Sleep Time] :This function is used to ON/OFF step of 10,20,30,60,90,120,180,240 mins.

•[Factory Settings] :This function is used for Reset to factory default settings.

•[HDMI CEC] :HDMI CEC ON/OFF switch.

•[Blueback] :This function is used to ON/OFF the blue screen at no signal condition.

	Hotel Mode Switch	Off
Picture	Set Password
Sound	Panel Key Lock	Off
Features	Max Volume
	Start Source	TV
Installation	Start Channel	1
	Volume Default
	Input Source Change	On

[Features in Hotel Mode Control] :

•[Hotel Mode Switch]: This function is used to ON/OFF the hotel mode.

•[Set Password]: This function is used to set the new password to access the hotel mode control.

•[Panel Key Lock]: This function is used to ON/OFF the panel pad key lock or unlock.

•[Max Volume]: This function is used to limit the max volume in TV.

•[Start Source]: This function is used to set the signal source after TV power on.

•[Start Channel]: This function is used to set the access channel after TV power on.

•[Volume Default]: This function is used to set the default volume value after TV power on.

•[Input Source Change]: This function is used to ON/OFF the input source change after TV power on.

Note

•All above features would be available in hotel mode switch is on.

Hotel Mode Control

Back Light

[Features in VGA Mode] :

•[Auto Adjust]: This automatically adjust H & V-position, Phase and Clock for VGA mode.

•[H-Position]:Adjust the horizontal position of image [Only in VGA].

•[V-Position]:Adjust the vertical position of image [Only in VGA].

•[Clock]: Adjust the picture if not in sync with TV screen.

•[Phase]: Adjust the picture if there is any blurring or shimmer in text.

[Only in VGA].

4.7Installation Menu

EN 13