Philips 42PFL5203, 52PFL7403 Remove the TV stand DDNote, Connect cables, BBNote, Bbwarning

Step 2 Remove the TV stand

DDNote

These instructions are only applicable to TV models with mounted stands. If your TV stand is not mounted, skip to Step 3 Connect cables.

1.Carefully place the TV face down on a flat, stable surface that is covered by soft cloth.The cloth should be thick enough to protect your screen.

2.Using a cross-head screwddriver (not supplied), unscrew the four screws that secure the stand to the TV.

3.Firmly pull the stand from the bottom of the TV. Place both the stand and screws in a secure location for future reinstallation.

Step 3 Connect cables

Connect the antenna cable, mains cord and all other devices to the back of the TV as described in the following sections and in Section 7 Connect devices.

Step 4 Secure the VESA-compatible wall bracket to the TV

BBWARNING

Use bolts (M6 for 32 inch models, M8 for all other models) and spacers to secure the VESA-compatible wall bracket to your TV.

BBNote

Depending on your VESA-compatible wall bracket, you may need to separate the mounting plate from the wall bracket for easier installation. Refer to your VESA- compatible wall bracket documentation for instructions.

1.Locate the four mounting nuts at the back of the TV.

Downloaded From TV-Manual.com Manuals

EN-8