13. Troubleshooting

!The Spirit 710 must be serviced by trained engineers. NEVER attempt any repairs or adjustments yourself - you could make the problem worse and invalidate the Guarantee.

ALWAYS check „ you have followed the steps listed in Section 2 to

first that: install and set up your Spirit 710.

„all connectors are firmly inserted in their sockets.

„mains power is switched on at the socket.

Everyday use

“I cannot make or Make sure you’re using the telephone line cable that

answer calls.” was supplied with your Spirit 710. Other telephone line cables might not work.

Switch off power at the mains socket, wait for a few seconds and then switch back on. This may solve the problem.

“The phone does

 

Make sure you’re using the telephone line cable

not ring”

 

that was supplied with your Spirit 710. Other

 

 

 

telephone line cables might not work.

 

 

 

 

 

 

 

Set the ringer volume to High, using the switch at

 

 

 

the back of the unit.

 

 

 

Check that the total REN value of all equipment

 

 

 

connected to your telephone line is not more than

 

 

 

4. Disconnect one or more telephones.

“The phone does

 

Make sure you’re using the telephone line cable

not dial”

 

that was supplied with your Spirit 710. Other

 

 

 

telephone line cables might not work.

 

 

 

 

“The Caller

 

You need to subscribe to Caller Display service from

Display feature

 

your local telephone company. Contact the local

isn’t working.”

 

telephone lcompany for details on how to subscribe.

 

 

 

 

 

 

 

The caller may have withheld their number by

 

 

 

dialing 141. Or they may be calling from a network

 

 

 

that does not transmit the Caller Display (for

 

 

 

example, it may be an international call).

Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.

28

Page 28
Image 28
Binatone 710 manual Troubleshooting