Binatone 710 Remote operation, To delete all 1 messages To go back to the default, To check Your

Answering Machine System continue...

To delete all 1 messages

2

3

To go back to the default

OGM

1

2

3

After playing back all of your messages, press and hold the DELETE button.

ÖThe display prompts DELETE ALL?.

Press the DELETE button again to confirm,the display shows "DELETE . . ." and after a short

delay, you will hear, “All messages erased.”

ÖThe machine will not delete any messages that you haven’t yet listened to.

The display automatically returns to standby mode.

If you no longer want callers to hear the OGMs that you have recorded, you can delete them and revert to the pre-recorded defaults as follows:

Make sure the machine is switched on.

ÖIf necessary, press and release the EXIT/ON-OFFbutton to switch to the OGM you want to delete.

Press the OGM/REWIND button to play the current announcement.

While the announcement is playing, press the

DELETE button twice.The display automatically returns to standby mode.

ÖPress the OGM/REWIND button to play the pre-recorded OGM for confirmation.

11. Remote operation

You can use the Answering System features of Spirit 710 when you are away from home. To protect your privacy, most of the features can be used only after you enter the three-digit REMOTE ACCESS Code. The base will display REMOTE while the Spirit 710 is being accessed remotely.

To check	1
your

REMOTE	2
ACCESS code
	3
	4

In standby mode, press the MENU button.

Press the UP or DOWN button until the display shows REMOTE ACCESS.

Press the MENU button to display your code setting. Ö The default code is ‘321.’

Press the EXIT button twice to return to standby mode.

Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.

24