Setting up continue...

2

3

4

5

6

REMOTE

ACCESS

1

2

3

4

5

6

7

Press UP or DOWN button until the display shows RINGS TO ANSWER.

Press MENU button to confirm.

Press UP or DOWN button to select TOLL SAVER, 2, 3, 4, 5, 6, 7, 8, or 9 rings. The default setting is 5.

ÖUse ‘TOLL SAVER’ when checking your Spirit 710 for messages from a remote location using long distance service or from a pay phone. The Answering machine responds after the 2nd ring only if you have a new message waiting. If there are no new messages, the phone will answer after the 4th ring. You can then hang up after the 3rd ring to avoid paying for the call.

Press MENU button to confirm.

Continue with programming, or press EXIT button to return to standby mode.

The REMOTE ACCESS is a three-digit code you need if you call away from home to check your

messages.The default is 321. You can change it to any three digits you want.

Press MENU button.

ÖThe display shows OPTIONS MENU .

Press UP or DOWN button until the display shows REMOTE ACCESS.

Press MENU button to confirm.

ÖThe first digit of the code will be blinking.

Press UP or DOWN button to set the first digit of the REMOTE ACCESS code.

Press MENU button to confirm.

ÖThe second digit of the code will be blinking.

Press UP or DOWN button to set the second digit of the REMOTE ACCESS code.

Press MENU button to confirm.

ÖThe third digit of the code will be blinking.

Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.

10

Page 10
Image 10
Binatone 710 manual Remote Access