Telephone operation continue...

To answer a call

To adjust the speakerphone volume

To end a call

To switch between the Handset and the Speakerphone

To mute the mouthpiece or microphone 1

2

When the phone rings;

Lift the handset or press the SPEAKERPHONE button on the Base unit.

ÖThe display shows the duration of the call in minutes and seconds.

During a call;

Adjust the volume of the speakerphone to your comfortable volume level using the SPEAKERPHONE

volume switch located at the right side of the Base unit.

Replace the Handset on the Base unit cradle or press the SPEAKERPHONE button on the Base unit.

ÖThe SPEAKERPHONE light indicator will turn OFF.

During a phone conversation through the Handset, press the SPEAKERPHONE button to speak hands-free.

The Speakerphone light will turn on, but conversation remains through the Handset until the Handset is

replaced on the Base unit cradle.

While in speakerphone mode, lift the Handset to enable a private conversation.

During a call, you can mute the microphone or the mouthpiece so that the person on the other end cannot hear you.

Press MUTE button once.

ÖWhile the microphone is muted, MUTE will be shown on the lower right corner of the display.

Press MUTE button again to get back to the call.

6. One Touch Memory

Store (M1, 1

M2,M3)

Memory

2 M1 M2

M3

In standby mode, press the MUTE/STO button

Key in the telephone number you wish to store, up to a maximum of 24 digits.

Press the M1,M2, or M3 button to store the number in the selected memory

Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.

12

Page 12
Image 12
Binatone 710 manual One Touch Memory, Telephone operation continue