Desk/Wall mounting continue...
Insert the rigid clips of the stand into the slots on the bottom of the phone (nearer the centre of the base). Press down firmly until the flexible clips clicks into place.
To remove the stand, (1) pinch the flexible clips, (2) pull back the stand, and then (3) slide up and forward as shown below.
Mark two points on the wall that are 92 mm apart to lay the fixing centers as shown below.
92 mm
BE CAREFUL to check that there are no electrical wires hidden in the wall.
Fix two screws (supplied with the unit) at the marked locations, leaving approximately 7mm between the wall and the the screw head. Hang the telephone on the screws using the wall mount slots. You may need to remove the telephone from the wall and tighten the
screws so that the Telephone is securely fixed and does not wobble. Place the Handset on the
cradle with the parking hook on the cradle arranged to fit in the parking recess under the earpiece on the Handset.
Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
6
