25
Software
25.1

Software update

Update from USB

It might be necessary to update the TV software. You need a
computer with an high-speed Internet connection and a USB
flash drive to upload the software on the TV. Use a USB flash
drive with at least 256MB free space. Make sure that write
protection is switched off.
1 - Start the update on TV
Press , select Setup and press OK.
Select Update software > USB and press OK.
2 - Identify the TV
Insert the USB flash drive into one of the USB connections of
the TV.
Select Start and press OK. An identification file is written on the
USB flash drive.
3 - Download the TV software
Insert the USB flash drive into your computer.
On the USB flash drive, locate the file update.htm and double
click it.
Click on Send ID.
If new software is available, download the .zip file.
After the download, unzip the file and copy the
file autorun.upg onto the USB flash drive.
Do not place this file in a folder.
4 - Update the TV software
Insert the USB flash drive into the TV again. The update starts
automatically.
The TV switches itself off for 10 seconds and then back on again.
Please wait.
Do not . . .
• use the remote control
• remove the USB flash drive from the TV
If a power cut occurs during the update, never remove the USB
flash drive from the TV. When the power returns, the update
will continue.
At the end of the update, the message Operation
successful appears on screen. Remove the USB flash drive and
press on the remote control.
Do not . . .
• press twice
• press the power switch on the TV
The TV switches itself off (for 10 seconds) and then back on
again. Please wait.
The TV software has been updated. You can use the TV again.
To prevent an accidental update of the TV software, delete the
autorun.upg file from the USB flash drive.

Update from Internet

If the TV is connected to the Internet, you may receive a
message from TP Vision to update the TV software. You need a
high-speed (broadband) Internet connection.
If you receive this message, we recommend you carry out the
update.
Select Update. Follow the instructions on screen.
You can also look for new updates yourself.
To look for an update . . .
1 - Press and select Setup and press OK.
2 - Select Update software > TV with Internet, then
press OK. Follow the instructions on screen.
When the update is complete, the TV switches off and back on
again automatically.
Wait for the TV to switch itself back on.
Do not press the Power switch on the TV.
25.2

Software version

To view the current TV software version . . .
1 - Press and select Setup and press OK.
2 - Select Software settings and press OK.
3 - Select Current software info and see Release Version.
4 - Press , repeatedly if necessary, to close the menu.
25.3

Open source software

This television contains open source software. TP Vision Europe
B.V. hereby offers to deliver, upon request, a copy of the
complete corresponding source code for the copyrighted open
source software packages used in this product for which such
offer is requested by the respective licences.
This offer is valid up to three years after product purchase to
anyone in receipt of this information.
To obtain the source code, please write in English to . . .
Intellectual Property Dept.
TP Vision Europe B.V.
Prins Bernhardplein 200
1097 JB Amsterdam
The Netherlands
85