6.

3Rinse out the cartridge compartment with hot water before replacing cartridge. Water from the tap should be on a hot setting but be careful to test water first so as not to burn or scald hands. Air dry razor thoroughly.

4Insert the connector into the new cartridge.

Push connector into the plastic cap of cartridge until you hear it “click” into position.

5Slide the new cartridge, with connector in place, into razor.

6Replace back cover of razor back into position until it snaps shut.

Use only Norelco Advantage Nivea for Men Shaving Lotion Cartridges, Model HQ150, with your Norelco Advantage Razor.

SHAVING

Use your new razor exclusively for 2 weeks to fully enjoy

the performance and comfort of a Norelco shave.*

*Stick with it! If you alternate shaving methods during the adjustment period, it may make it more difficult to adapt to the Norelco shaving system.

Your Norelco Advantage Razor features a special compartment for cartridges containing Nivea for Men Shaving Lotion.This unique lotion is applied to your skin while you’re shaving to offer you the most comfortable, smoothest shaving experience ever from Norelco.This continuous moisturizing prepares the skin, sets up your beard and ensures that the razor moves smoothly over the skin, offering optimal skin contact.

1Remove Protective Razor Head Cap. Turn razor ON.

7.

2Hold the razor against the skin and press the yellow pump button located under razor heads on front side of razor to dispense shaving lotion. Once a sufficient amount of lotion has pumped out, move the razor heads quickly over the skin.

3Shave against the direction of beard growth using quick, straight and circular motions.

4You may use this shaving system on either wet or dry skin. The shaving lotion provides immediate hydrating action and lessens drag or pull against skin.

5Easy does it. Gently press the razor to your skin so the floating heads can follow the contours of your face.

6Turn razor OFF when finished shaving.

7After shaving, you may rinse and dry your skin.

Flip open Razor Head Assembly and clean heads and hair chamber by running under hot water.

8You may leave the cartridge in place in your razor if you plan on using razor regularly. When you will not be using your razor for an extended period of time, it is recommended that you remove the cartridge and clean the razor following maintenance instructions before storing.

CLEANING

Always switch Razor OFF and unplug before cleaning.

Always store Razor with Protective Razor Head Cap on razor heads.

Never clean, remove or replace head assembly while motor is ON.

Page 7
Image 7
Philips 561X manual Shaving, Cleaning