14
4Turn Razor Head Assembly over so that underside is
exposed.
5Press down and turn wheel of frame counterclockwise.
6Remove the frame and brush clean.
7Remove and clean one cutter and head at a time.
Be careful not to mix up cutters and heads.They are a
matched set and if interchanged,it will greatly affect
shaving performance.
8Separate the cutter from the head.
9Only brush the cutter in an upward motion.
Use the short bristled side of the brush.
10 Brush the slots of the razor head.
For optimum performance,razor cutters and heads should
be cleaned in a degreasing liquid (e.g.Norelco Razor
Cleaner,model RC1776 or alcohol) and lubricated with
Norelco Razor Lubricant,model AL80, or one drop of
mineral oil (in the center of the head).