6756X B_W new DFU 9/12/03 5:25 PM Page 12 | (Black plate) |
12ENGLISH
C 3 Slide the cartridge with the connector in place into the razor. It only fits properly if the white side of the connector is pointing upwards. Close the cover.
4Press the applicator button a few times until the Nivea for Men shaving lotion or gel appears in the small hole located on razor head assembly.The razor is now ready for use.
Replacing Cartridges
1Open back cover of razor.
2Remove empty cartridge, pull out and save the connector. DO NOT discard the connector.
3Rinse out cartridge compartment with water before replacing cartridge.Air dry thoroughly.
4Insert connector into the plastic cap of new cartridge until it clicks into position.
5Follow steps 2-4 for “Inserting the First Cartridge.”
Use only Norelco Advantage Nivea for Men shaving lotion (HQ160) or gel
(HQ161) cartridges with this razor. Do not throw the connector away when you replace an empty cartridge.You will need to use
