16ENGLISH
C 10 Brush the slots of the comb.
For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Norelco Razor Head Cleaner, model RC1776
or alcohol) and lubricated with Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head).This helps prevent
wear of the shaving heads.
ENGLISH 17
After Each Use:Trimmer
1Turn razor to OFF (O) position.
| C |
| Push trimmer slide switch up to pop up |
| 2 | ||
| C | trimmer. | |
| Clean trimmer with the brush every time | ||
| |||
| |||
C 11 |
12 |
13 |
C 14 |
C 15 |
16 |
Replace the cutter and comb into the Razor Head Assembly.
Repeat the process for the other two sets of cutters and combs.
Replace the frame.
Turn the wheel clockwise until it locks into place.
Replace the Razor Head Assembly back on razor.
Put the protective razor head cap on the razor to protect heads.
3 |
you use it. |
C 4 Lubricate the trimmer teeth with Norelco Razor Lubricant (model AL80) or with one drop of mineral oil every 6 months.
5 Close trimmer by sliding trimmerswitch down.
This razor has no other
Any other service should be performed by an
Authorized Norelco Service Location.
