Philips 7140XL, 7145XL manual Trimming, Cleaning Razor Heads

14ENGLISH

Trimming
To groom sideburns and moustache:
1	Turn razor ON.
C 2	Push down spring-release trimmer switch.
The trimmer can be activated while the razor is
running.
C 3	Hold trimmer as shown and move in
	downward strokes with gentle pressure.
C 4	Close trimmer by pressing trimmer down.

5 Turn razor OFF.

Cleaning

C ◗ The tap symbol on the back of the razorindicates that the razor can be rinsed under running tap water.

◗Regular cleaning guarantees better shaving results.

◗Always switch Razor OFF, unplug and remove power cord before cleaning.

◗Never clean, remove or replace head assembly while motor is on.

◗Do not apply pressure to combs. Do not touch razor heads with hard objects as this may dent or damage precision-made slotted combs.

◗Do not use razor if combs are damaged or broken. Facial injury may occur.

ENGLISH 15

	Cleaning: Razor Heads
	The easiest and most hygienic way to clean the
	razor heads is to rinse them after each use or at
	least once a week with hot water: Water from
	the tap should be on a hot setting, BUT BE
	CAREFUL TO TEST WATER FIRST SO AS NOT
	TO BURN OR SCALD HANDS.
	◗ Regular cleaning guarantees better shaving
	results.
C	◗ Do not immerse razor in water.
	◗ While rinsing razor heads,water may drip out of
	the base of razor.This is a normal occurence.
		Always turn razor OFF, unplug from outlet
	1
		and remove cord from razor before
		cleaning.
C		Press the Razor Head Release Button, flip
	2
		open the Razor Head Assembly.

C 3	Clean inside razor heads and hair chamber
	by running under hot water.
C 4	Clean outside of Razor Head Assembly by
	running under hot water.
5	Close the Razor Head Assembly and shake
	off excess water.