Test reception, Language and location preferences

Test reception

This menu allows you to check the strengh of the signal you are receiving through your aerial.

& From the digital mode, press the	key to
display the setup menu.

éUse the ï key to select installation and press Æ key to display the installation menu.

Setup	11:46
Installation
Service lists	Frequency
Service setup	Network name
Test reception	Signal quality
	Signal strength

Test signal quality
	Close

“Use the ï key to select Test reception and press Æ key. You obtain an indication of the actual programme frequency, the network name, the signal quality and strength.

‘Use the Æ key to enter the Frequency slot

and use the to keys to enter the frequency of the digital channel you want to test. Use the Æ key to move to the next character space. Your TV magazine can provide the list of digital channel numbers. Refer to the frequency table on page 34.

If after keying the frequency, the reception is still poor, you can try improving, renewing, adjusting or updating the aerial. It is however advisable to contact a specialised aerial installer in order to achieve best results.

(After entering the frequency, use the key to exit Frequency slot.

§To return to previous menu, press the Í key.

è Press the key to exit the menu.

Language and location preferences

This menu allows you to select your preferred language for audio, subtitle, teletext and menu and make changes to the location (country

and time zone).

& From the digital mode, press the	key
to display the setup menu.

éUse the ï key to select Preferences and press Æ key.

Setup	11:46
Preferences
Language	Audio
Location	Subtitle / Teletext
Digital Audio Output	Subtitling Mode
	Subtitling for hearing impaired
	System

Select your preferred language

“Select Language, Location or Digital Audio Output (ï) and press Æ key.

‘Use the Î ï keys to select a setting and press Æ key to enter into the sub-menu.

Make your adjustment and press key or Í key to exit.

Language default settings

•Audio : to select the audio sound language.

•Subtitle/Teletext : to select the subtitle/teletext language.

•Subtitling mode : off, on or auto (subtitle only displayed in case of original audio transmission).

•Subtitles for hearing impaired : to activate or deactivate the specific subtitle for hearing impaired (if made available by the broadcaster).

•System : to select the menu language.

Location settings

•Country : to select the country where you

are located. CAUTION : if you select a wrong country, the channel numbering will not be according to the standard for your country and you may not receive all services or nothing at all. Note that the Language can be selected independently from the Country.

•Time zone : to select the time zone where you are located.

Digital Audio Output settings

To select AC3 (if the amplifier supports the Dolby Digital format) or PCM/MPEG (if it does not support Dolby Digital format).

Note : If you select AC3 sound, you must have your TV connected to a Home Theatre System or amplifier. In this mode, no sound will be heard from the TV speakers only.

(To return to previous menu, press the Í key.

§ Press the key to exit the menu.