Philips USING THIS FEATURES OF YOUR SKIP 800 TELEPHONE, skip, 0 9 or, Safety Precaution

USING THIS FEATURES OF YOUR SKIP 800 TELEPHONE

Setting the Dialing Mode

1	PULSE
2	TONE

Mixed mode dialing

If your telephone is set to or using the Pulse mode, pressing the [] button will temporarily convert your telephone to the tone mode, the telephone will automatically reset back to Pulse mode when the call is terminated.

Setting the Ringer

1 ... 9

To switch off the ringer

Note that during power failure, the telephone will ring even if set to

ringer-off mode. But after power-up, mode will be restored.

0

Storing telephone numbers in the 5 memory storage locations

1
2	0		9
4		...
3
5

note : Insert a pause wherever necessary by pressing . A pause lasts for 2.5

seconds. If you need a longer pause, press as many times as you wish. The pause duration will accumulate according to the number of times

is pressed.

:A telephone number may not consists of more than 24 digits including pauses, otherwise, it cannot be stored under one memory location.

Erasing memories

1

2

3

4

5

General Note:

During power failure, you must first lift the handset, in order to operate all setting above.

Receiving incoming calls

Handsfree Conversation

0 9 or

note : To switch from handsfree to private conversation, lift the handset.

:To switch from private to handsfree conversation, press and re- place the handset.

The Last Number Redial feature

The last number dialed will be stored automatically and can be redialed with

the touch of the redial button.

To redial the number

note : The telephone number can only be redialed if:

•it consists of not more than 32 digits.

• is the first button pressed after you take the line. If other buttons are pressed first, the previous telephone number will be replaced.

The Call Timer Feature (for reference only)

•When receiving an incoming call, conversation time will start automatically.

•When making a call, the conversation time will start counting 10 seconds after the telephone number is entered.

– and the conversation time will be shown on the display.

•Terminating the call will stop the call timer automatically.

–The total conversation time will remain displayed for 5 seconds.

The , , and Flash buttons

These buttons can be used for special public or private exchange ser-

vice functions. Please consult your network operator for further de-

tails concerning the network service provided.

Technical Specifications

Power Requirements:	Number of messages:
9V AC, 400mA	ICM or Memo 32 (max.)
	OGM1 1
	OGM2 1

Memory Capacity (total recording time):

approximately 14 minutes

SAFETY PRECAUTION

•Make sure the power plug is near the telephone, as the only way to disconnect the telephone from the power mains is by unplugging the power adaptor.

•Connection to the electric mains: 110 volts, monophase alternating current, with the exception of installation with IT diagram described in standard EN 60-950. Please not! The mains voltage falls under the category of “very hight voltage” according to the criteria of standard EN 41-003.

•Connection to the telephone network: the voltage in this network falls under the category of “ TRT ” (telephone network valtage according to the standard EN 41-003).

•This product is intended for indoor use only.

TROUBLESHOOTING

PROBLEMS

CAUSES

SOLUTIONS

No display

•

Power is not properly

•

S e c u r e l y

p l u g

t h e

connected

power adaptor into the

wall socket

and

the

proper

jack

on

the

telephone.

The loudspeaker

pro-

•

Power is not properly

•

S e c u r e l y

p l u g

t h e

duces no sound

connected

power adaptor into the

•

The volume control is

wall socket

and

the

proper

jack

on

the

in the lowest position

telephone.

• Turn the volume up

by pressing

No dial tone

•

Telephone line cord not

•

S e c u r e l y

p l u g

t h e

s e c u r e l y

p l u g g e d

telephone

line

cord

into the

telephone

i n t o t h e t e l e p h o n e

line jack and wall jack

line jack and wall jack

Call is disconnected when

•

Wrong TBR time is set

•

S e t t h e T B R

t i m e

R is pressed

a c c o r d i n g

t o

y o u r

network. If in doubt,

please

contact

your

network operator

Answering Machine

•

Handset cord is not

•

Connect the handset

Outgoing message cannot

connected

cord securely

be recorded properly

•

O u t g o i n g m e s s a g e

•

Record the outgoing

duration is less than

message for at least 3

3 seconds

seconds

The machine does not

•

Unit is in the Answer off

•

Press

button

to

answer calls

mode

switch the answer mode

on

•

No line connection

•

Check the line con-

nection

•

No Power

•

Check the power

M e s s a g e s

a r e

n o t

•

Memory full

•

Erase the old messages

recorded

•

P r e s s t h e A n s w e r /

Ans Only mode is on

•

Record button

•

No Power

•

Check the power

T h e m a c h i n e s t o p s

•

A silence period of 7

•

Do not stop speaking for

recording

before

the

seconds is detected

more than 7 seconds

message is finished

•

Memory is full during

•

Erase the old messages

recording

The answering machine

•

You are not using a

•

Be sure you are using a

does not respond to

touch-tone telephone

t o u c h - t o n e

P h o n e

remote control com-

•

The answering machine

beeper

mands

does not receive the

•

Re-enter command

commands properly

Abnormal

display or

•

A system error has

•

Unplug the power and

performance

occured

repeat

the

start

up

procedures

after

30

seconds

•

If not successful, please

unplug the power and

call your local PHILIPS

Service Center

1800 XXXX

FCC REQUIREMENTS

This equipment complies with Part 68 of the FCC Rules. On the base unit of this equipment is a label that contains among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. If Requested, this information must be given to the Telephone Company.

The REN is useful to determine the quantity of devices you may connect to your telephone line and still have all of those device ring when your telephone number is called. In most, but not all areas, the sum of the REN’s of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, you should contact your local telephone company to determine the maximum REN for your calling area.

If your equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice isn’t practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service.

This equipment complies with Part 68 of the FCC Rules. On the base unit of hte equipment is a label that contains among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. If Requested, this information must be given to the Telephone Company.

The REN is useful to determine the quantity of device you may connrct to your telephone line and still have all of those device ring when your telephone number is called. In most, but not all areas, the sum of the REN's of all devices connected to one line should not exceed five (5.0). To be certain of the number of devices you may connect to your line, as determined by the REN, you should contact your local telephone company to determine the maximum REN for your calling area.

If your equipment causes harm to the telephone network, the telephone company may discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice isn't practical, you will be notified as soon as possible. You will be informed of your right to file a complain with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your equipment.. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service.

USER MANUAL

™

skip 800

Feature Telephone with LCD and

Fully Digital Answering System.

•Advanced Quality Speakerphone

•No Battery Required Message Backup

•Voice Time/Day Stamp for Messages•Complete Voicehelp Setup and Operation

United States

Guarantee Terms

Dear Customer,

Thank you for purchasing a Philips Consumer Communications product. We hope that it makes your life easier. Philips Consumer Communications warrants to the original retail purchaser that the SKIP800, and all accessories provided by Philips in the sales of this product are free from defects in material and workmanship, under normral installation and use, according to the following terms and conditions:

1.This limited warranty extends only to the "Consumer" for products purchased and used in the USA.

2.The limited warranty for the "Product" extends for twelve (12) months from the date of purchase of the "Product" by the "Consumer".

3.During the applicable limited warranty period, "Philips" appointed service network will repair, or replace, at "Philips" option, any defective parts or "Product", with new or refurbished replacement items, and return the "Product" to the "Customer" in working condition. No charge will be made for either parts or labor in repairing equipment. Repaired or replacement "Product" is warranted for the balance of the warranty period.

4.The "Consumer" must provide information to reasonably prove the date of purchase upon request, so please retain your sales receipt.

5.Transportation, delivery, and handling charges incurred in the transport of "Products" to and from the service location are to be paid by the "Customer".

6.ANY OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO THE LIMITED WARRANTIES MER- CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED.

Some states do not allow disclaimers of implied warrants, so the above limitation may not apply to you. This warranty gives you specific legal rights. You may have other rights which vary from state to state.

7.Philips total liability for damages relating to or arising out of the use of the product, regardless of the type or cause of such damage, shall not exceed the original purchase price paid for the "product". In no event shall "PCC" be liable for any indirect special, incidental, or consequential damages (including but not limited to lost profits or revenue, inability to use the product or other associated equipment, cost of substitute equipment, and any claims by other parties) resulting from the use of the product. Some states do not allow the exclusion of limitation of incidental or consequential damages: therefore, the foregoing limitations may not apply to you.

8.This warranty does not cover: charges for installation or set up, adjustments of customer controls, and instal- lation or repair of system outside the unit, the product repair and/or replacement because of misuse, shipping damage, abuse, water damage accidental, unauthorized repair or other causes not within the control of "Philips" and the - reception or operational problems caused by signal conditions, network reliability, or cable antenna systems. Finally, the product purchased, used, serviced, or shipped from outside the USA, or used for com-

mercial or institutional purposes (including but not limited to product used for rental purposes).

If order to avoid unnecesssary inconvenience, we advise you to read the operating instructions before contacting your dealer. If you have any comments, questions or difficulties regarding this product. Please contact the pic consumer help desk at 800 059 0817.

If you experience trouble with this telephone equipment, please contact the following address and phone number for information on obtaining service or repairs.

The telephone company may ask that you disconnect this equipment from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning.

This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs.

Philips Consumer Help Desk:	Company : Philips Consumer Communications
Phone: 1-800-659-0817	Gantz Road, Suite C
Fax: (423) 475-0411401	Grove City, OH 43123

3140 025 20323