Philips 8251XL, 8250XL manual Once a Month Razor Head, After Each UseTrimmer

18ENGLISH

C5 Separate the cutter from the comb and rinse clean under hot water.

Do not clean more than one cutter and comb at a time, since they are all matching sets. If you accidentally interchange the cutters and combs, it could take several weeks before optimal shaving performance is restored.

C 6 Replace the set back into the Razor Head Assembly so that the ‘wings’ on the comb fit within the brackets located towards the center of the Assembly.

The set will only fit into the Razor Head Assembly if the ‘wings’ are between the brackets. Make sure that the two pointy edges of the head fit exactly into the recesses.

7 Repeat the process for the other two sets of cutters and combs.

8 Replace the frame.

C 9 Press down (1) and turn the black 3-pronged locking bracket clockwise (2) until it locks into place.

10 Close the Razor Head Assembly.

ENGLISH 19

Once A Month: Razor Head

For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. rubbing alcohol) and lubricated with one drop of mineral oil (in the center of the head). This helps prevent wear of the shaving heads.

After Each Use:Trimmer

1	Turn razor OFF.
2	Push down spring-release trimmer switch.
C 3	Clean trimmer with the brush every time
	you use it.
C 4	Lubricate the trimmer teeth with one
	drop of mineral oil every 6 months.
5	Close trimmer by pressing trimmer down.

This razor has no other user-serviceable parts.

For assistance call 1-800-243-3050.

Downloaded from www.Manualslib.com manuals search engine