8845XL 8846XL.QXD 2/25/04 3:44 PM Page 17 | (Black plate) |
ENGLISH 17
Make sure that the two pointy edges of the comb fit into the recesses.
7Repeat the process for the other two sets of cutters and combs.
8Replace the frame.
1 | C 9 Press down and turn wheel clockwise until |
| it locks into place. |
2
10Replace the Razor Head Assembly back on razor.
Once A Month: Razor Heads
For optimum performance, razor cutters and combs should be cleaned in a degreasing liquid (e.g. Norelco Razor Cleaner, model RC1776, or rubbing alcohol ) and lubricated, with Norelco Razor Lubricant, model AL80, or one drop of mineral oil (in the center of the head).This helps prevent wear of the shaving heads.
After Each Use:Trimmer
1Turn razor OFF.
2 | Push Trimmer Slide Switch up to pop up |
| Trimmer. |
C 3 | Clean Trimmer with the brush every time |
| you use it. |
