32ENGLISH
Cleaning the Jet Clean Canister
For optimal performance of the Jet Clean System, it is recommended that you empty the cleaning solution canister and thoroughly rinse the canister clean every 2 weeks.
1Place the Jet Clean System on a flat, level surface.
|
|
| C |
| Simultaneously press the buttons located |
|
|
| 2 | ||
|
|
|
|
| on both sides of the Jet Clean System (1) |
|
|
|
|
| and lift the appliance off the Jet Clean |
|
|
|
|
| canister (2). |
|
|
|
| Always remove appliance from canister by lifting | |
|
|
| C | straight up. Do not tilt Jet Clean System. | |
|
|
|
| Discard any remaining cleaning solution in | |
|
|
| 3 | ||
|
|
|
|
| the canister. |
|
|
|
| The cleaning solution can be safely poured down | |
|
|
|
| the sink as there are no harmful ingredients. | |
|
|
| C |
| Simply rinse the canister with warm water. |
|
|
|
| ||
|
|
| 4 | ||
|
|
|
|
| Wipe the canister with a towel or tissue |
|
|
|
|
| to remove excess water. |
|
|
| C |
| Carefully lower the Jet Clean System over |
|
|
|
| ||
|
|
| 5 | ||
|
|
|
|
| the canister making sure the release |
|
|
|
|
| buttons snap back into position. |
|
|
|
|
|
|
ENGLISH 33
Replacing the Razor Heads
◗Replace the razor heads once a year for optimal shaving results.
◗Replace damaged or worn razor heads with model HQ9 Philips Norelco razor heads only.
Razor head check indication
◗The replacement head indicator symbol starts blinking to remind you to check if it’s time to replace your razor heads to obtain optimal shaving results.
Maintenance
◗Always remove razor from the Jet Clean System before cleaning appliance.
◗Unplug the Jet Clean System.The Jet Clean System may be wiped clean using a damp cloth.
◗Before refilling transparent cleaning reservoir, discard remaining cleaning solution and rinse the outside and inside of the reservoir completely with warm water from the tap.
◗Water from the tap should be on a warm setting to clean all washable parts.
Note; DO NOT place or clean any parts of the Jet Clean System in a dishwasher.
