18ENGLISH
2First time charging and recharging after
C ◗ When batteries are fully charged, the word “Full” scrolls across the display.After a few hours the word “FULL” stops appearing and the display shows the remaining shaving time in minutes along with the plug symbol.
Charging Razor with Jet Clean
System
C 1 | Connect the small plug to the Jet Clean |
| System. Connect the charging plug into any |
| 100V to 240VAC outlet. Use only the |
| charging plug provided. |
The razor holder automatically moves up to the | |
highest position. | |
C 2 | Remove protective razor head cap from |
| razor. |
C 3 | Place the razor head side down in the razor |
| holder so that the razor head fits into the |
| configuration shown inside the Jet Clean |
| System. Gently press the base of the razor |
| towards the back of the Jet Clean System |
| so that the razor base fits snugly in place. |
| Lock the razor into place by pushing the |
ENGLISH 19
lever down completely.The lever will not lock down unless the razor has been properly placed in the holder. Do not force lever.
C ◗ The charging light blinks to indicate the razor is being automatically (re)charged and will light up continuously when fully charged.
4 First time charging and recharging after
When batteries are fully charged, the charging light on the Jet Clean System will light up continuously.
◗You may store your razor in the Jet Clean System. Unplug from outlet when charging/cleaning is complete.
C 5 Raise the lever holding the razor to the highest position (1) and carefully remove razor from the Jet Clean System (2).
When razor is removed from the Jet Clean
System, the charging light will turn off.