24ENGLISH
8You may also clean the hair chamber without water by using the supplied brush.
Once A Month: Razor Heads
Do not mix up the cutters and combs as the shaving performance may be adversely affected for several weeks before optimal shaving performance is restored.
|
| 1 | Turn razor OFF, remove the charging plug |
|
|
| from the outlet and cord from the razor |
|
|
| or charging stand. |
| C |
| Press the razor head release button to |
2 | |||
|
|
| open the razor head assembly. |
|
|
|
C 3 | Turn the wheel counterclockwise (1) and |
| remove the retaining frame (2). |
C 4 | Remove and clean one set of cutters and |
| combs at a time. |
C 5 | Separate the cutter from the comb and |
| rinse clean under hot water. |
| ENGLISH | 25 |
Do not clean more than one cutter and comb at | ||
a time, since they are all matching sets. If you |
| |
accidentally interchange the cutters and combs, it | ||
could take several weeks before optimal shaving | ||
performance is restored. |
| |
C 6 | Replace the set back into the Razor Head | |
| Assembly so that the ‘wings’ on the comb | |
| fit within the brackets located towards the | |
| center of the Assembly. |
|
The set will only fit into the Razor Head Assembly | ||
if the ‘wings’ are between the brackets. Make sure | ||
that the two pointy edges of the head fit exactly | ||
into the recesses. |
| |
7 | Repeat the process for the other two sets | |
| of cutters and combs. |
|
8 | Replace the frame. |
|
C 9 | Press down (1) and turn wheel clockwise | |
| (2) until it locks into place. |
|
10 | Close the Razor Head Assembly. |
|
Once A Month: Razor Heads |
| |
For optimum performance, razor cutters and |
| |
combs should be cleaned in a degreasing liquid |
| |
(e.g. Philips Norelco Razor Cleaner, model |
| |
RC1776, or rubbing alcohol) and lubricated with | ||
Philips Norelco Razor Lubricant, model AL80, or | ||
one drop of mineral oil (in the center of the |
| |
head). This helps prevent wear of the shaving |
| |
heads. |
| |
