12ENGLISH

C

C

C

Low Battery Indicator - The Numeric Display:

When the battery is running low, the plug symbol and the minutes indicator will blink after you have turned the razor OFF. You will also hear a few short beeps. If this occurs while shaving, you should have enough power to complete your shave. When you turn razor ON or OFF the display will come on for approximately 10 seconds.

-The Battery Display:

When the battery is running low, the plug and battery symbols will blink after you turn

razor OFF. You will also hear a few short beeps. When you turn razor OFF or ON the display will stay on for approximately 10 seconds.

Battery Empty

To indicate that the battery power is too low to operate the razor,‘Lo’ appears on the display.

Demonstration Program

The razor has a demonstration program that will run through the display of razor functions. During the demonstration the razor will automatically turn ON and OFF 2 times. To activate, press and hold the ON/OFF button for approximately 6 seconds. After 3 seconds the lock symbol appears; keep the ON/OFF button pressed.Then release the button and the razor will continue through the demonstration program.You can interrupt the demonstration by pressing the ON/OFF button again.

ENGLISH 13

C Cleaning Indicator

The blinking faucet symbol will remind you that razor heads need to be cleaned.This happens after each shave.

C Replacement Head Indicator

Every year, depending on your shaving behavior, after turning the razor OFF, the replacement head symbol indicator starts to blink and you will hear a beep.The replacement head symbol will remain visible for the next 7 shaves to remind you that with new shaving heads you will guarantee yourself optimal shaving performance.

You can reset the razor by pressing the ON/Off button for 3 seconds while the replacement head symbol is blinking. The symbol then disappears, and you will hear a short confirming beep.

If you do not reset the razor, after 7 shaves the razor will automatically reset itself.

NOTE: If the display shows the word ‘CHECK’ and a blinking replacement head symbol and faucet symbol, clean the razor thoroughly before you continue shaving (see ‘cleaning’). After cleaning, if the word ‘CHECK’ and a blinking replacement head symbol and faucet symbol remain on the display, immediately replace the razor heads (see ‘replace the razor heads’).

Page 7
Image 7
Philips 9190XL manual Battery Empty, Demonstration Program