English
22
1Press REPEATone or more times during CD play.
➜When REPEATTRACK lights up, the current track plays
repeatedly. When REPEATALL lights up, the disc or
program plays repeatedly.
2To return to normal play, press REPEAT one or more times
until:
➜The REPEATlabel disappears from the display.
Note:
- You can use shuffle in combination with
REPEATALL
or
programmed play.
-
REPEAT
is also cleared if you open the disc tray.
•You can program up to 99 tracks to play in any desired
sequence.
•Tracks can be programmed more than once, but each time
counts as a track (STEP).
Programming
1In Stop mode press PROGRAMto enter Program mode.
➜PROGRAMflashes and PROGRAM appears on the display.
2Select the required track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
or:
Key in a track number with the number keys. For 2-digit
numbers, press the keys in rapid succession.
➜The track will be stored in the program.
➜The track number, total program time and the number of
programmed tracks (STEPS) are displayed.
3Repeat step 2for all tracks to be programmed.
4Press STOP or PROGRAMto end programming.
➜PROGRAMlights continuously.
5Press PLAY/PAUSE 2;to start programmed play.
Note:
- To review the program, press PROGRAM, followed by 5or
6with the CD recorder in Stop mode.
- To add more tracks to the program, repeat steps 1to 5.
- If you try to store more than 99 tracks, PROG FULL
appears on the display.
Clearing a program
1Press STOP 9if necessary to stop programmed play.
2Press STOP 9again to clear the program.
➜PROGRAMdisappears from the display.
•The program is also cleared if you open the disc tray.
Erasing a track from a program
1In Stop mode press PROGRAMto enter Program mode.
2Use 5or 6to select the track from which to delete.
➜The track number and program step will be shown on
the display.
3Press CANCEL to erase the track from the program.
➜The remaining program steps and the remaining playing
time of the program will be displayed.
DIGITAL
OPTICAL
ANALOG
II
I
CD
SYNC
PROGRAM
SHUFFLEREPEAT
SCAN
ALL
MANUAL
TRACK
RW
REM TRACKREC TIME REMTOTAL TIME STEPTRACK FADE
278
11
DIGITAL
OPTICAL
ANALOG
II
I
CD
SYNC
PROGRAM
SHUFFLEREPEAT
SCAN
ALL
MANUAL
TRACK
RW
REM TRACKREC TIME REMTOTAL TIME STEPTRACK FADE
123456789
10 11
Remarks about programming
DIGITAL
OPTICAL
ANALOG
II
I
CD
SYNC
PROGRAM
SHUFFLEREPEAT
SCAN
ALL
MANUAL
TRACK
RW
REM TRACKREC TIME REMTOTAL TIME STEPTRACK FADE
12345678