Troubleshooting

If a fault occurs, first check the points listed below before taking the set for repair.

If you are unable to remedy a problem by following these hints, consult your dealer or service centre.

WARNING: Do not open the set as there is a risk of electric shock. Under no circumstances should you try to repair the set yourself, as this will invali- date the guarantee.

Problem

Possible cause

• Remedy

No sound /power

Volume not adjusted

• Adjust the VOLUME.

Power cord not securely connected

Connect the AC power cord properly

Batteries dead/ incorrectly inserted

Insert (fresh) batteries correctly

Headphones connected to the set

• Disconnect headphones.

Poor radio reception

Weak radio signal

For FM, extend, incline and turn the telescopic antenna for best reception. Reduce its length if the signal is too strong.

For MW, the set uses a built-in antenna. Direct this antenna for best reception by turning the whole set.

Display does not function properly / No reaction to operation of any of the controls

Electrostatic discharge

Switch off and unplug the set. Reconnect after a few seconds.

Disposal of your old product

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.

Please inform yourself about the local separate collection system for electrical and electronic products.

Please act according to your local rules and do not dispose of your old products with your normal household waste.The correct disposal of your old product will help prevent potential negative consequences for the environment and human health.

Page 10
Image 10
Philips AE2480 user manual Troubleshooting, Disposal of your old product, Problem, No sound /power, Poor radio reception