Clock/Timer | AUX IN |
|
|
When the set ON time is reached, the set
–jumps to the selected waveband and preset station if the set is on.
–is switched on the set and jumps to the selected waveband and preset station if the set is off.
–
ON flashes for one minute.
When the set OFF time is reached, the set
–does not act if it is off.
–is switched off automatically if it is on.
–
OFF flashes for one minute.
Activating or deactivating timer
•Press TIMER/SET TIMER repeatedly to activate or deactivate the timer.
➜
appears when timer is on.
➜
disappears when timer is off.
Helpful hints:
–The function of switching timer on or off is available in both standby mode and active mode.
Setting sleep timer
You can set a certain period of time after which the set switches to standby mode automatically.
1Press SLEEP repeatedly to select the desire period of time (in mSLEEP). Selection is as follows:
➜
appears.
2When you select SL:00, the sleep timer is turned off.
➜
disappears.
Helpful hints:
–When the sleep function is active, press SLEEP to display the remaining time.
–Press SLEEP again will change sleep time to the next lower increment (for example, if the remaining time is 59 minutes, sleep time changes to 45 min, 30 min, 15 min).
AUX IN
You can listen to the sound of the connect- ed external device through your AE2480.
1Press SOURCE once or more to select
AUX IN mode.
➜
is displayed.
2To avoid noise distortion, turn down the vol- ume on your external device.
3To adjust the sound and volume, use the sound controls on your external device and AE2480.
Environmental information
All unnecessary packaging material has been omitted.The packaging can be easily separated into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging, dead batteries and old equipment.
