![](/images/new-backgrounds/1258023/2580239x1.webp)
English | Controls/Power Supply |
Congratulations on your purchase and welcome to Philips!
To fully benifit from the support that Philips offers, register your product at
www.philips.com/welcome.
!DC jack
–inlet for power cord
@ AUX IN
–inlet for external sound source
Supplied Accessories
–1 x AC/DC certified switching adapter (Model No.: ED4120090060A, Input: 230V~ 50Hz, 70mA,
Output: 9V, 600mA)
–Audio cable
Top & front panels (see 1 )
1PRESET
–stores and recalls 10 FM and 10 MW sta- tions
1/ 2
TUNING +/–
– in FM/MW mode, fine tunes a station
SOURCE
– selects FM, MW, or AUX mode
22 – switches on/off the standby mode
3 MEMORY/AUTO SCAN
–in FM/MW mode, scans stations
and stores them as presets automatically
4DBB/SET TIME
–in standby mode, sets the clock
–switches DBB sound effect on or off
5 TIMER
–sets the time to switch on or off the set automatically
6SLEEP
–switches the set off automatically after the set time
7VOLUME +/– – adjusts volume level
8 LCD display
–displays FM/MW radio and time information
Back panel (see 1)
9Telescopic antenna
–improves FM reception
0 p
–3.5 mm stereo headphone socket
CAUTION
High voltage! Do not open.You run the risk of getting an electric shock. The machine does not contain any
Modification of the product could result in hazardous radiation of EMC or other unsafe operation.
This set complies with the radio interference requirements of the European Union.
Power Supply
Whenever convenient, use the mains supply cord if you want to conserve battery life. Make sure you remove the plug from the set and wall outlet before inserting batteries.
Batteries (not included)
1Open the battery door and insert 6 batteries, type
2Replace the battery door, making sure the bat- teries are firmly and correctly in place.The set is now ready to operate.
•Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst:
•Do not mix battery types: e.g. alkaline with car- bon zinc. Only use batteries of the same type for the set.
•When inserting new batteries, do not try to mix old batteries with the new ones.
•Remove the batteries if the set is not to be used for a long time.
Batteries contain chemical substances, so they should be disposed of properly.