Troubleshooting
If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or serv- ice centre.
WARNING: Do not open the set as there is a risk of electric shock. Under no circumstances should you try to repair the set yourself, as this will invali- date the guarantee.
Problem
–Possible cause
• Remedy
The radio has no power.
–Power cord not securely connected.
• Connect the power cord properly.
No sound is heard.
–Volume not adjusted.
• Adjust the VOLUME.
–Headphones connected to the set.
• Disconnect headphones.
–The station is currently out of service.
•Wait until the service resumes, or tune to a new station.
The indication “No stations available” is displayed.
–DAB coverage is currently not available in your area.
• Wait until the coverage resumes.
–DAB signal is weak.
•
The indication “Station off air” is dis- played.
–The station is currently out of service.
•Wait until the service resumes. Or, perform a scan by pressing SCAN in DAB mode.
Poor reception
–Signal strength is weak.
•
I cannot hear the DAB station I have selected.
–SELECT button was not pressed after changing a station by pressing 1 / 2.
•Press SELECT button to tune to the selected station.
Note:
In case of malfunciton due to electrostatic discharge, just reset the product (Reconnect of power source may be required.) to resume normal operation.
