Philips AEA2000 4Product information, Troubleshooting, Specifications, About Bluetooth device

4Product information

Note

•• Product information is subject to change without prior notice.

Specifications

Amplifier

Output Voltage	1000 mV RMS
Signal to Noise Ratio	> 62 dBA
Total Harmonic Distortion	< 2 %

Bluetooth

Standard	Bluetooth Standard Version
	2.1+EDR
Frequency Band	2.402~2.480 GHzISM Band
Range	10m (free space)

General information

AC Power	Model: AS030-090-
	EE033/EML0900330V
	(Philips);
	Input: 100-240 V ~,
	50/60 Hz, 0.15 A;
	Output: 9 V 0.33 A
Operation Power
Consumption	< 3 W
Dimensions - Main Unit
(W x H x D)	74 x 28 x 72 mm
Weight - Main Unit	0.04 kg

5 Troubleshooting

Warning

•• Never remove the casing of this device.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.

No power

•• Make sure that the AC power adapter is connected properly.

•• Make sure that there is power at the AC outlet.

No sound from your Hi-Fi system

•• Check if the Hi-Fi system is connected to power.

•• Make sure that the system is connected with the Bluetooth adapter properly.

•• Make sure that the Bluetooth wireless connection is successful.

•• Adjust the volume of your system and Bluetooth device.

•• Make sure that the Hi-Fi system is in Audio-in or line-in mode.

About Bluetooth device

The audio quality is poor after connection with a Bluetooth-enabled device.

•• The Bluetooth reception is poor. Move the device closer to the Bluetooth adaptor or remove any obstacle between the device and the adaptor.

EN 6