10 EN
7 Use -/+ on the top of the Bluetooth®

speaker to adjust volume.

Note
If no prompt pops up on your iPad at step 1, you can
go to Settings -> General -> About -> AEA7100 ->
Find App for Accessory to install the app.
Tip
If automatic pairing fails, press and hold on the
speaker for more than 10 seconds to pair the
microphone with the speaker manually.
If the wireless microphone remains disconnected from
the Bluetooth® speaker for more than 15 minutes, it
switches to standby mode automatically. To switch it
on again, you need to slide the OFF/ON switch on the
microphone to theOFF position and then slide back to
the ON position.
You can use controls available on the app to adjust
sound effects.
If you experience howling or echo, try to increase
the distance between the microphone and speaker
or adjust the angle of the microphone towards the
speaker.
Play from a Bluetooth® enabled device
Note
The effective operation range between the Bluetooth®
speaker and your Bluetooth® enabled device is
approximately 10 meters (30 feet).
To pair with a Bluetooth® enabled mobile device, make
sure that: no iPad is docked; or you have stopped music
play and exited StarMaker Karaoke + Auto-Tune® on
your docked iPad.
To pair with a new mobile device, you can press to
remove the existing Bluetooth® connection.
To play from a Bluetooth® enabled device, make sure
that you are not playing music from your iPad docked
on the Bluetooth® speaker.
1 Press on the top of the Bluetooth®

speaker.

» The Bluetooth®indicatorashesblue

quickly.

2 Enable Bluetooth® on your device

that supports A2DP (Advanced Audio

DistributionProle).