3.Hold down or press ¡1 / 2™ repeatedly to set and adjust the hours.
4.Press TIME SET to confirm.
™ The clock digits for the minutes flash.
5.Repeat the steps 3 - 4 until you complete all the other settings for minutes, year, month and days.
TUNER
1Press TUNER/AUX once to switch on the radio (FM only).
™Display shows the radio frequency of the last selected waveband. Your preset station is also shown if you are listening to a preset. (See 2)
2Adjust the sound using
3To select preset stations, press the respective PRESET button
TUNING TO RADIO STATIONS
1Press and hold ¡1 / 2™ until the frequency in the display starts changing.
™Display shows “Scrh” during automatic tuning.
™After the system tunes to a station of sufficient reception, display shows its frequency.
• To tune to a weak station, press ¡1 / 2 ™ briefly and repeatedly until an optimal reception is found.
To improve reception (FM):
Extend and position the pigtail fully to obtain optimum reception.
STORING AND USING PRESET STATIONS
You can store up to 5 FM radio stations in the memory.
1Tune to your desired station (see TUNING TO RADIO STATIONS).
2To store a preset, hold down briefly on a PRESET button
™ Display shows the preset number of your station.
3Repeat steps 1 and 2 to store your other stations.
• You can overwrite a preset station by storing another frequency in its place.
4Press a PRESET button
™ To display clock time, press 2; on the set.
USING THE ALARM
GENERAL
Two different alarm times can be set. This can be useful when you need to be woken up at a different time e.g. during the week and at the weekend, and you can set different
•tuner mode.
•buzzer mode. The gentle wake buzzer alarm increases its beep tone frequency within seconds.
•dock mode.
SETTING THE ALARM TIME (See 3)
1In any mode, press and hold ALM1 or ALM2 for two seconds.
™ALM1 / ALM2 icon and the hour digits flash. And the icon for the current alarm mode also flashes.
2Hold down or press ¡1 / 2™ repeatedly to set and adjust the hours.
3Press ALM1 or ALM2 to confirm.
™ALM1 / ALM2 icon and the minutes digits flash. And the icon for the current alarm mode also flashes.
4Hold down or press ¡1 / 2™ repeatedly to set and adjust the mintues.
5Press ALM1 or ALM2 to confirm.
SETTING THE ALARM MODE
1Press POWER to switch to standby mode.
2Select your choice of alarm mode: either docked player, buzzer, or radio by
using the DOCK•BUZZER •TUNER slider.
•At the set alarm time, the docked player or radio or buzzer will switch on automatically.
Helpful hints:
–If you have selected TUNER alarm mode, make sure you have properly tuned to a station before turning off the set.
–If you have selected DOCK alarm mode, make sure you have docked the compatible player, or the buzzer mode will be selected automatically.
–To check the alarm time setting for ALM1 or ALM2, press ALM1 or ALM2.
