Philips AJ301DB/79 user manual Remote control, Pull the battery tray out as shown in the figure

Remote control

Important!

•Before using the remote control, remove the insulation plastic tab as shown in the figure.

•If the remote control does not function correctly or the operating range is reduced, replace the battery with a new (CR2025) type battery.

1.Pull the battery tray out as shown in the figure.

2.Replace a new battery according to polarity indication, and fully insert the battery tray back to the original position.

3 2 1

Batteries contain chemical substances, so they should be disposed of properly.

SELF-POWERED BACK-UP

The self-powered back-up conveniently allows your preset stations, alarm and clock time settings to be stored for up to 10 minutes when there is a power interruption e.g. AC power failure. The complete clock radio and backlight illumination will be switched off.

If power supply returns after 10 minutes and the display shows:

•clock time blinking - indicates you need to re-adjust the clock time.

CAUTION

High voltage! Do not open.You run the risk of getting an electric shock. The machine does not contain any user-serviceable parts. Modification of the product could result in hazardous radiation of EMC or other unsafe operation.