BASIC OPERATION.
Switching on the system
•Press POWER.
™The system will switch to the last selected source.
•Press TUNER/AUX or DOCK.
™The system will switch to the selected source.
Switching the system to standby mode
• In any source mode, press POWER.
Switching off the volume temporarily
Press MUTE on the remote control to stop sound
™Playback will continue without sound and the display shows MUTE .
• To start sound playback you can:
–press MUTE again;
–adjust the volume controls;
–change source.
Illumination brightness
Press REPEAT ALARM / BRIGHTNESS CONTROL once or more.
•The brightness of the display can be adjusted:
High � Low � Off � High .
SETTING THE CLOCK AND DATE
1.In any mode, press and hold TIME SET until clock digits flashes.
2.Press 2; to select 12 Hours/ 24 Hours mode.
3.Hold down or press ¡1 / 2™ repeatedly to set and adjust the hours.
4.Press TIME SET to confirm.
™ The clock digits for the minutes flash.
5.Repeat the steps 3 - 4 until you complete all the other settings for minutes, year, month and days.