English

Clock/Alarm

Setting the Clock/Alarm time

1.Press and hold MODE or ALARM 1/ ALARM 2 until clock digit for hour flashes.

2.Press repeatedly, or hold down ∞/ § to adjust the hours.

3.Press MODE or corresponding ALARM 1/ ALARM 2 to confirm the hour setting, and the clock digits for minute flashes.

4.Press repeatedly, or hold down ∞ / § to adjust the minutes.

5.Press MODE or corresponding ALARM 1/ ALARM 2 to confirm the minute setting.

For ALARM only – Selecting the Alarm mode

6.Press SOURCE repeatedly to select the desired alarm sound among Sound of nature, CD, Radio or a buzzer.

3.Ways to switch off the alarm

To activate ‘Alarm Reset’ during the alarm call, press SLEEP.

To activate ‘Alarm Repeat’ during the alarm call, press REPEAT ALARM/BRIGHTNESS CONTROL.

To deactivate the alarm completely, press once corresponding ALARM 1 or ALARM 2 untill

disappears.

CD playback

This CD clock radio supports audio discs including CD-R (CD-recordable), CD-RW (CD-rewritable).

1.Press STANDBY-ONto switch on from clock mode.

2.If CD is not selected, press SOURCE once or more to select it.

3.Lift the CD door to open.

4.Insert a CD with printed side facing up, and close the CD door.

5.Press ); to start playback.

6.To stop playback, press 9.

Radio

Autostore

1Press repeatedly SOURCE to select FM or MW.

2Press and hold PROG until the frequency in the display starts running.

Available stations are programmed (MW or FM). After all stations are stored.

To listen to a preset or autostore station

Press the PRESET +/- buttons once or more until the desired preset station is displayed.

Printed in China

Jason-0809

Page 2
Image 2
Philips AJ3916 Series CD playback, Radio, Setting the Clock/Alarm time, For Alarm only Selecting the Alarm mode