CD
Programming tracks
You may store up to 20 tracks in the desired sequence. If you like, store any track more than once.
1In the stop position, press PROG to start programming
➜Display shows 01 indicating the start of the program. PROG and current track number flash
2Press 4 / ¢ once or repeatedly until the desired track number appears in the display
3Press PROG to store the desired track.
➜ Display shows 02 (up to 20 in sequence), indicating the next program location available. PROG and current track number flash
4Repeat steps
➜ FULL is displayed if you attempt to program more than 20 tracks
5Press ÉÅ play the program
Erasing the program
You can erase the contents of the memory by:
●Press 9
–once if in the stop position;
–twice during playback
●Open the CD door
English
13
