English Controls/Power Supply
Congratulations on your purchase and
welcome to Philips!
To fully benefit from the support that
Philips offers, register your product at
www.philips.com/welcome.
Supplied accessories
–
AC power cord
Top and front panels (See 1)
1Cassette recorder keys:
PAUSE ;
–
pauses playback or recording
STOP•EJECT 9
/
–
stops playback or recording.
–
opens the cassette holder.
F.FWD/REWIND 5 or 6
–
fast winds/rewinds the tape
PLAY 1
–
starts playback
RECORD 0
–
starts recording
2p- 3.5mm stereo headphone jack
Helpful hints:
– Connecting the headphones will switch off
the speakers.
3
TONE
-
RADIO (SW) only:for fine tuning
4
Source selector:TAPE (Off), RADIO
–
selects tape or radio source of sound
–
switches off the set
Band selector: MW, SW, FM
–
selects wavebands, MW, SW or FM
5VOLUME rotary – adjusts volume level
6TUNING rotary – tunes to radio stations
7MIC
(built-in microphone)
–
for voice recording
Back panel (See 1)
8Telescopic antenna
- improves FM/SW reception.
9AC IN ~ - inlet for power cord
0Voltage selector – (inside the battery
compartment, not for all versions) adjust to
match the local voltage 110/220V before
plugging in the set.
!Battery door - open to insert 4 X 1.5
batteries, type R20 or D-cells
Power supply
Whenever convenient, use the power cord if
you want to conserve battery life. Make sure
you remove the plug from the set and wall
outlet before inserting batteries.
Batteries (not included)
•Insert 4 batteries, type R20 or D-cells
(preferably alkaline) with the
correct polarity. (See 1)
Batteries contain chemical substances,
so they should be disposed of properly.
• Incorrect use of batteries can cause
electrolyte leakage and will corrode the
compartment or cause the batteries to burst:
• Do not mix battery types: e.g. alkaline with
carbon zinc. Only use batteries of the same
type for the set.
• When inserting new batteries, do not try to
mix old batteries with the new ones.
• Remove the batteries if the set is not to be
used for a long time.