Philips AQ6691/00 manual Tuning, To improve reception, TUNING Manual tuning, Automatic tuning

TUNING

To improve reception:

FM: The headphone cord functions as the FM-aerial. Extend it fully and position the cord.

AM: Uses the built-in aerial. Turn the set to find the best position.

5Adjust the sound with VOLUME and DBB ON/OFF (Dynamic Bass Boost).

6To switch off the radio, press RADIO ON/OFF•BAND once or more until OFF appears briefly.

– The display returns to clock time.

TUNING

Manual tuning

SELECTING & STORING FREQUENCIES: PRESETS

You can store the frequencies of up to 10 radio stations in the memory, 5 on each wave band. A stored frequency is only erased from the memory by storing another frequency in its pIace.

1Select your wave band and tune to your desired station (See previous chapter on TUNING).

2Press one of the preset numbers (1-5) for 2 seconds or more to store your station.

– PRESET appears in the display.

3To listen to a preset station, select your wave band and then press the preset number of your desired station.

English

•Press TUNING + or – briefly, once or more until the right frequency is found. In this way, the frequency can be changed step by step.

Automatic tuning

1Press and hold down the TUNING + or – control until the display frequency starts to run.

2When a station of sufficient strength has been found tuning stops, or you can stop automatic tuning by pressing either TUNING + or – control again.

3Repeat steps 1 and 2 until you have found the desired station.

Erasing the PRESET Memory

•Use the tip of the headphone plug or a ballpoint pen to press RESET found on the back of the cassette door.

–The display shows 0:00. All previous preset stations are erased and the clock time will need to be re-entered.

5