Philips AT830, AT875 C , C C, C, C, , C

ENGLISH

10 Replace the frame and turn the lock

clockwise until it locks into place.

C 11 Insert the notch of the shaving unit into

the slot in the top of the razor (1) and

then close the shaving unit (2).

NOTE: If the shaving unit does not close smoothly,

make sure you inserted the shaving heads

properly and that the retaining frame is locked.

1 Turn razor OFF.

C 2 Push down spring-release trimmer switch.

C 3 Clean trimmer with the short-bristled side

of the brush every time you use it. Brush

up and down along the trimmer teeth.

C 4 Lubricate the trimmer teeth with one

drop of mineral oil every 6 months.

5 Close trimmer by pressing trimmer down.

22 ENGLISH

w Replace the razor heads once a year for

optimal shaving results.

w Replace damaged or worn razor heads with

model HQ8 Philips Norelco razor heads only.

1 Turn razor OFF, remove the charging plug

from the outlet and power cord from the

razor.

C 2 Press the Razor Head Release Button to

open the Razor Head Assembly.

C 3 Pull the shaving unit off the razor.

C 4 Turn the lock counterclockwise to unlock

(1) and remove the retaining frame (2).

5 Remove the razor heads and place the

new razor heads in the shaving unit.

C Make sure that the two pointy edges of the head

fit exactly into the recesses.