Philips AT875, AT830 LED Multi-Purpose Display, Before First Use, Charging, Low Battery Indicator

10 ENGLISH

LED Multi-Purpose Display

The display provides the following information:

◗ Charging Indicator

C -When the razor is charging, the white battery symbol blinks.

◗ Full Charge Indicator

C -When the battery is fully charged, the white battery symbol lights up continuously. After approximately 30 minutes the battery symbol goes off to save energy.

◗ Low Battery Indicator

C -When the battery is almost empty (5 or less shaving minutes left), the orange plug symbol blinks. When you turn the razor OFF the orange plug symbol continues to blink for a few seconds.

C w Quick Charge Indicator

-When you charge the empty battery, both the white battery symbol and plug symbol blink. After approximately 3 minutes, the orange plug symbol goes out, while the battery symbol continues to blink.

- The razor now contains enough energy for a 5-minute shave.

ENGLISH 11

Before First Use

wCharge the razor before you start using it (see ‘Charging’). Make sure the razor is switched off before you start charging it.

Important

wOnly use the power cord provided to charge the razor.

wThe power plug transforms 100-240V AC to less than 24V DC.

Charging

wCharging or recharging at temperatures below 40ºF or higher than 95ºF adversely affects lifetime of batteries.

wIf the razor is subjected to a major change in temperature, pressure or humidity, let it acclimatize for 30 minutes before using.

wCharging or recharging requires one full hour.

wA fully charged razor has a cordless shaving time of up to 50 minutes.

wWhen charging razor for the first time or after a long period of non-use, charge until the white battery symbol lights up continuously.

wThe razor will not operate while power cord is connected to an electrical outlet.

wDo not charge razor in a pouch.