Lenoxx Electronics CD-78 Power Sources, Battery Operation, Tips On Battery Use, Battery Recovery

Models: CD-78

1 20
Download 20 pages 45.21 Kb
Page 3
Image 3
POWER SOURCES

POWER SOURCES

Your CD player requires 2 size “AA” alkaline batteries (not included), or use the AC Adaptor (included), or in a car you may use the Car Cigarette Lighter Adaptor.

BATTERY OPERATION

1.Apply slight downward thumb pressure on Battery Door (marked “OPEN” ), and gently slide it in an outward direction to open the door.

2.Insert 2 size “AA” fresh alkaline batteries according to + and - polarity markings inside the battery compartment. For longer operating life, heavy duty alkaline batteries are recommended (also see TIPS ON BATTERY USE as listed below).

3.Close the Battery Door, make sure it is snapped into place.

NOTE: If you will not use your set for one week or more, remove the batteries and unplug the AC Adaptor from the wall outlet.

TIPS ON BATTERY USE

Reversing polarities will damage the batteries and possibly your set. Be sure to follow + and - markings as indicated.

Do not mix different types together (Alkaline, Carbon-Zinc,

Nickel-Cadmium etc.), or old batteries with new ones.

When not in use for an extended period of time, or while internal

batteries will not be used, remove them to prevent possible acid leakage or corrosion resulting in damage to your player.

Bear in mind that battery life expectancy is based upon volume and bass listening levels and if anti-skip circuitry is used. Using the anti-skip feature consumes more power. Maximum battery power consumption happens at maximum settings. Typical life for 2 size “AA” alkaline batteries is about 8 hours of continuous use. If the set fails to switch tracks, or if it shuts off, your batteries are weak. Replace both batteries, or use the AC Adaptor (or Car Adaptor).

When the batteries have become discharged, they must be disposed of in a safe manner that complies with all applicable laws.

Installation of batteries should only be done by an adult (for safety).

BATTERY REPLACEMENT

If the alkaline batteries are weak and discharged, this symbol “ BATTERY OPERATIONTIPS ON BATTERY USE ” shows in the display, then the power automatically turns off. If this occurs, replace the alkaline batteries (also if display does not show anything, the batteries are dead).

This set can be used without batteries as long as the AC Adaptor (or Car Adaptor) is used.

TECHNICAL NOTE: Because of the special integrated circuits and servomotor in this set, this set will not work with weak batteries, it will automatically shut off if the batteries get too weak for proper operation.

BATTERY RECOVERY

When batteries get weak and cause the set to stop, if you wait about 30 minutes, the batteries will regain a small amount of capacity and play for a few more minutes. This does not mean the set is defective. Replace the weak batteries or use the AC Adaptor (or Car Adaptor).

2

 

CD-78(72RD)070299 NL v.1 E

 

Page 3
Image 3
Lenoxx Electronics CD-78 Power Sources, Battery Operation, Tips On Battery Use, Battery Replacement, Battery Recovery