Lenoxx Electronics CD-78 Programming Your Playing Sequence Programmed Play, Programming Example

PROGRAMMING YOUR PLAYING SEQUENCE PROGRAMMED PLAY

•The tracks (songs) on the disc can be programmed (arranged in advance) to play in any order you prefer (up to 20 tracks can be programmed).

Programming		Example:
Program Number	1	2	3	4	5	6	7	8	etc.
Track Number (song number)	3	5	8	1	2	4	1	1	etc.

•During programming, the word PROG flashes in the display. To program songs to play in your

preferred order, follow steps below:								3.Press the Program Button. Track 3 is now
1.Press the Program Button once during play or
in stop mode.									programmed.	PR O G R A M
	PR O G R A M										x 1
		x 1
									Program # 2 will now show in the display, ready
The word PROG will flash in the Display.									for your next selection of track.
											PROG
					PROG
								4.Repeat steps 2 and 3 to program other tracks
	TRACK			PROGRAM					till you finish (up to 20 selections).
	NUMBER		NUMBER						NOTE: Do this quickly to avoid the set shutting
									itself	off.
								5.After programming is finished, press Play to
									begin programmed play. “PROG ” stops flashing
2.Press the Search Button (						or	) to select		(but continues to show in the display) and music
									begins.
track number 3 (example).
								NOTE:		P LAY
										PAUSE
								- The player will stop automatically after all
									programmed tracks have been played.
								- To quit programmed play, press Stop Button
									once. Then you may press Play Button to re-
									start normal play.
									Your programming will be lost:
					PROG				• If the CD Door is opened.
									• When the alkaline batteries are exhausted or
									removed or the AC Adaptor is disconnected.
									• When you press Stop twice.

10 CD-78(72RD)070299 NL v.1 E