Lenoxx Electronics CD-78 operating instructions Digital Anti-Skipmemory Function

DIGITAL ANTI-SKIP MEMORY FUNCTION

The digital anti-skip function uses semiconductor memory to prevent the sound from skipping or stopping when the set is shaken, shocked or vibrated during play.

PRESS ANTI-SKIP BUTTON TO TURN ANTI-SKIP ON PRESS IT AGAIN TO TURN ANTI-SKIP OFF

When the Anti-Skip Button is pressed during play, music will stop

for a few seconds, and the “ ” indicator appears in the display and the digital anti-skip function turns on. The digital data equivalent to approximately 10 seconds of music is stored in “read-ahead ” memory buffer before it is decoded and played.

The “	” mark changes to the “	” mark, indicating that the data
buffer is full.

•When the set is subjected to shock during play, the data stored

in memory continues to be decoded and played. This gives the pickup time to stabilize and continue reading new music. As the data is read from memory, the indicator changes from

“ ” to “ ”.

Once the pickup returns to its original position, new data is

stored in memory and the display changes back to the “	”
mark.

•If the set is subjected to repeated shocks and all the data

stored in memory is used up, the “ ” mark is displayed and the sound will skip or stop for a brief period until the memory basket fills up again.

•Press the Anti-Skip Button again to turn the digital anti-skip function off.

•Keep the digital anti-skip function off when using the set in a stable - no vibration area, where it will not receive shocks. The batteries will last longer when the anti-skip function is turned off.

NOTE:

When the digital anti-skip function is switched on or off, the sound will be interrupted for 1 or 2 seconds . This is normal (the blank time is used to fill the memory).

A N T I-SKIP

X 1

DISPLAY WITH EMPTY MEMORY

DISPLAY WITH FULL MEMORY

SOME MEMORY USED WHEN

SET IS SHOCKED

ALL MEMORY USED

ANTI-SKIP MEMORY FULL

ANTI-SKIP MEMORY EMPTY

8 CD-78(72RD)070299 NL v.1 E