22ENGLISH

10Replace the frame and turn the lock clockwise until it locks into place.

C

1

2

11Insert the notch of the shaving unit into the slot in the top of the razor (1) and then close the shaving unit (2).

NOTE: If the shaving unit does not close smoothly, make sure you inserted the shaving heads properly and that the retaining frame is locked.

After Each Use:Trimmer

C

1Turn razor OFF.

2Push down spring-release trimmer switch.

C

C

3Clean trimmer with the short-bristled side of the brush every time you use it. Brush up and down along the trimmer teeth.

4Lubricate the trimmer teeth with one drop of mineral oil every 6 months.

5Close trimmer by pressing trimmer down.

Page 22
Image 22
Philips AT895, AT875, AT830 manual After Each UseTrimmer, Turn razor OFF Push down spring-release trimmer switch