6Product information
Note
Product information is subject to change without prior notice.
6SHFLÀFDWLRQV
$PSOLÀHU
Rated Output Power | 2 X 18 W RMS |
Frequency Response | +]N+] |
| dB |
Signal to Noise Ratio | > 86 dB |
MP3 Link | 800 mV RMS 20 |
| kohm |
Speakers
Speaker Impedance | 8 ohm |
Speaker Driver | 66 mm full range |
Sensitivity | 82 dB/m/W |
Wireless
Wireless | 802.11b/g | |
standard |
|
|
Wireless | WEP (64 or 128 bit), | |
security | WPA/WPA2 |
|
Frequency | 0+]&+&+ | |
range | (for /79, /37, /55, /97) | |
| 0+]&+&+ | |
| (for /12, /10, /05) |
|
PBC (one | Yes | |
button push) |
|
|
General information
AC power | Input: 100 ~ |
PHILIPS | 240 V, 50/60 |
SWITCHING POWER | +]$ |
SUPPLY MODEL: | Output: 18 V |
EFS05001800250 CE | 2.5 A |
Operation Power | 40 W |
Consumption |
|
Power Consumption in | < 0.5 W |
Standby Mode |
|
Dimensions | 358 x 137 x |
- Main Unit (L x W x H) | 203 mm |
Weight | 3.05 kg |
- With Packing | 2.1 kg |
- Main Unit |
|
7 Troubleshooting
Warning
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome).When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
No power
Make sure that the AC power plug of the device is connected properly.
Make sure that there is power at the AC outlet.
No sound or poor sound
Adjust volume on the Philips AirStudio app or on AW3000 directly.
If you have chosen the wired connection, check whether the Ethernet cable has been connected properly and securely (see 'Option 1: Set up wired connection' on page 7).
Check the
If the audio source is an external audio player, adjust volume on the audio player directly.
No response from the unit
Restart AW3000, and then set up the Wi- Fi network for AW3000 again (see 'Option 2: Set up wireless connection' on page 8).
Disconnect and reconnect the AC power plug, and then switch on the device again.
Check if your
EJFHUWLÀHG7KLVGHYLFHLVRQO\ FRPSDWLEOHZLWK:L)LEJFHUWLÀHG routers.
If your
FHUWLÀHGPDNHVXUHWRHQDEOHWKH
802.11b/g mode. AW3000 does not support connection to routers with 802.11n only.
This device does not support the WPS- PIN method.
Enable SSID broadcast on the
Keep away from potential sources of interference which may affect
Make sure that the SSID name of your home router consists of alphanumeric characters, with no space or special characters like %/#/* inserted.
If you choose to rename your AW3000 manually on the Philips AirStudio app, do not use special characters or symbols.
For some new types of
Occasional breaking of music streaming Do one or all of the following:
Move AW3000 closer to your
Remove any obstacles between AW3000 and your
Avoid using
Check if your network speed is fast enough (in cases where multiple devices share the same router, the wireless performance may be affected).Turn off the other devices connected to your home router.
Enable the Quality of Service (QoS) option (if available on the
Turn off other
14 EN | EN 15 |