Philips AX5003/10 manual Features, Selecting a track and searching, Programming track numbers

Models: AX5003/10

1 12
Download 12 pages 28.84 Kb
Page 9
Image 9

English

FEATURES

Selecting a track and searching

Selecting a track during playback

• Briefly press ° or ¤ once or several times to skip to the current, previous or next track.

y Playback continues with the selected track, and the track’s number is displayed.

Selecting a track when playback is stopped

1Briefly press ° or ¤ once or several times to select the desired track. The track number is displayed.

2Press 2; to start CD play.

y Playback starts with the selected track.

Searching for a passage during playback

1Keep ° or ¤ pressed to find a particular passage in a backward or forward direction.

y Searching starts while playback continues at low volume. After 2 seconds the search speeds up.

2Release the button when you reach the desired passage. y Playback continues from this position.

Notes: – If the player is in SCAN mode (see MODE chapter), searching is not possible.

In SHUFFLE, SHUFFLE REPEAT ALL or REPEAT mode (see MODE chapter), or while playing a program, searching is only possible within the particular track.

FEATURES

Programming track numbers

You can store up to 30 tracks to play in a program. A single track may be stored more than once in the program.

1 While playback is stopped, select a track with ° or ¤.

2Press PROGRAM to store the track.

yPROGRAM lights up; the track number programmed and P with the total number of

stored tracks are displayed.

3Select and store all desired tracks in this way.

4 Press 2; to start playback of your selected tracks. y PROGRAM is shown and playback starts.

You can review the program by pressing PROGRAM for more than 2 seconds. y The display shows all the stored tracks in sequence.

Notes: – If you press PROGRAM and there is no track selected, SELECt is displayed.

– If you try to store more than 30 tracks, FULL is displayed.

Clearing the program

While playback is stopped, press 9 to clear . program

y CLEAr is displayed once, PROGRAM goes off, and the program is cleared.

Note: The program will also be cleared if the power supply is interrupted, or if the CD-player lid is opened, or if the set switches off automatically.

English

14

15

Page 9
Image 9
Philips AX5003/10 manual Features, Selecting a track and searching, Programming track numbers