POWER SUPPLY / GENERAL INFORMATION

English

Mains adapter (supplied or optionally available)

Use only the AY 3170 adapter (4.5 V/300 mA direct current, positive pole to the centre pin). Any other product may damage the player.

4.5

VDC

1 Make sure that the adapter’s voltage corresponds to the local voltage.

2Connect the adapter to the 4.5V DC socket of the player and to the wall socket.

Note: Always disconnect the adapter when you are not using it.

Belt Clip (not on all versions)

1 To attach the belt clip to the CD-player, position the

 

shaped grip (found on the back of the belt clip) so that

BELT CLIP

it fits into the belt clip hole of the CD-player.

 

2Turn the clip to LOCK as indicated on the set.

3To detach, gently lift the belt clip and turn

to RELEASE as indicated on the set.

LOCK

 

LIFT

 

RELEASE

Environmental information

All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into two mono materials: cardboard (box) and polyethylene (bags, protective foam sheet).

Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment.

10

Page 10
Image 10
Philips AX5003 manual Power Supply / General Information, Environmental information, Belt Clip not on all versions