Philips AX5003 manual CONTROLS, refer to the illustration on, Remote control not on all versions

English

CONTROLS, refer to the illustration on page 3

1OPEN 2...........opens the CD lid

2	2;	switches the player on, starts or pauses CD play
3	9	stops CD play, clears a program or switches the player off
4	¤	skips and searches CD tracks forwards
5 ESP		ELECTRONIC SKIP PROTECTION ensures continuous CD playback
		regardless of vibrations and shocks
6 MODE		selects the different playing possibilities: SHUFFLE,
		SHUFFLE REPEAT ALL, REPEAT, REPEAT ALL and SCAN

7........................display

8 PROGRAM	.......programs tracks and reviews the program
9 BASS	switches the bass enhancement on and off. This button also
	switches acoustic feedback (the beep) on/off when it is pressed for
	more than 2 seconds
0 °	skips and searches CD tracks backwards
! RESUME	stores the last position of a CD track played
HOLD	locks all buttons
OFF	switches RESUME and HOLD off

@LINE OUT/p....3.5 mm headphone socket, socket to connect the player to another audio input of an additional appliance, remote control socket (not on all versions)

#VOL E.........adjusts the volume

$ 4.5V DC ...........socket for external power supply

%........................typeplate

^........................belt clip holder

Remote control (not on all versions)

Use only the Philips AY 3767 cord remote control with your CD-player. The buttons on the remote control have the same functions as the corresponding buttons on the CD-player.

1If necessary, press 9 once or twice until the set is switched off,

2Firmly plug the remote control into the LINE OUT/p socket of the CD-player, and then connect the headphones to the socket of the remote control.

3Turn the volume down with VOL F on the remote control and set VOL E on the CD-player to position 8.

6